| Inlet Pressure Range P1 | 0.02 ~ 0.4 MPa / 2.90 ~ 58.0 psi |
| Outlet Pressure Range P2 | 1.5 ~ 50 KPa / 0.22 ~ 7.25 psi |
| Accuracy Class (AC) | Up to AC 5 |
| Lockup Pressure Class (SG): Slam Shut Flow | Up to SG 10
|
| Accuracy Class (AG): | Up to AG 5 |
| Working Temperature (t) | Nitrile (NBR) seat (standard): -20 ~ 60°C / -4 ~ 140°F
Flurocarbon (FKM) seat: -10 ~ 60°C / 14 ~ 140°F |
| · Modular design – The regulator is combined by actuator, trim, main valve and slam shut modules
· OPSO/UPSO – The slam shut is OPSO default. Use both OPSO and UPSO option for better safety. · All of the regulator can choose slam shut status signal electricity remotely transferred (Anti-explosion: EEx d IIC T6) except Type RTZ-40/0.4SE – Can check the slam shut working condition in the monitor by remotely transferred · Fast response, large flow rate – It’s suitable for the field that needs fast response, such as boiler; special design body can give more flow rate than same nominal diameter regulator · Good Lockup Pressure Class, Bubble tight – Trim with self-aligning, can get good Lockup Pressure Class and bubble tight. · Full balance trim, good accuracy – Full balance trim can avoid influence of P1, increase the accuracy · Simple structure, convenient maintenance – All the modules can be pulled out, replaced or maintained in line except body |
Sunday To Thursday
9:00 AM to 6:30 PM
Building # 125 (2nd Floor), Road # 05, New DOHS, Mohakhali, Dhaka – 1206, Bangladesh